ElectrifyCost

District of Columbia

Induction Stove Cost in District of Columbia

Estimate the installed cost, applicable rebates, and operating-cost change for a heat pump in District of Columbia. Calibrated to local labor rates (1.34× HVAC multiplier), retail electricity (17.5¢/kWh), and standard climate.

Climate zone
4A
4,200 HDD
Electricity
17.5¢/kWh
EIA retail average
Natural gas
$1.55/therm
if available
Heat pump class
Standard
recommended

Your details

Optional — auto-sets state

Estimated installed cost

$3,250

Typical range $1,725 – $6,175 · 30-inch induction range (basic)

Low

$1,725

Best case

Mid

Typical

$3,250

Typical

High

$6,175

Worst case

Itemized cost breakdown

Click a row for math & sources
Line itemLowMidHigh
Total$1,725$3,250$6,175

Monthly energy impact

~Neutral

$1/ mo

Bills change very little — between -$3 and $1 per month either way.

Panel upgrade likelihood

Low risk

100A typically supports induction range with load calculation

  • Is a new 240V circuit required, or can I use existing wiring?
  • Is the 240V outlet (NEMA 14-50 or similar) included?
  • Will my panel support the new induction load?
  • Is gas line capping by a licensed plumber included if I'm switching from gas?
  • Is the range, cooktop, or only the wiring included in the quote?
  • Does the quote include permit and inspection?
  • Is there a separate cookware allowance for induction-compatible pans?
  • What is the labor warranty?
  • Are any countertop modifications needed?
  • Is removal and disposal of the old range included?

What can change this price

  • Estimates are planning ranges, not contractor quotes. Actual prices depend on your home, local labor rates, equipment, code requirements, utility rules, and contractor availability.

Heat pump rebates & credits in District of Columbia

Program Type Amount Expires
Income-qualified
Federal · Rebate $0–$840 2031-09-30

Frequently asked questions

How much does an induction range install cost in District of Columbia?

In District of Columbia, a basic 30-inch induction range install runs $2,010–$4,690. A new 240V circuit adds $400 to $1,300 if needed (most kitchens with a gas range do not have one). Capping the existing gas line costs $150 to $450. Premium ranges (Bosch 800, Café, Wolf, Miele) add $1,000 to $3,000.

What are the operating-cost savings vs. gas in District of Columbia?

Induction-vs-gas operating cost is roughly neutral at typical cooking volumes — the annual delta is typically within $25 per year. The real value is indoor air quality (no combustion byproducts), faster boil times, easier cleanup, and removing a combustion appliance from the kitchen.

What rebates apply to induction stoves in District of Columbia?

The federal 25C credit does NOT cover stoves. DOE HEEHRA provides up to $840 for electric stoves, cooktops, or ranges in income-qualified households, administered state by state. The rebate table above shows 1 applicable programs for District of Columbia.

Will existing cookware work with induction?

Induction works only with magnetic cookware (cast iron, magnetic stainless steel). The magnet test: if a fridge magnet sticks to the bottom of a pan, it works. Aluminum, copper, and most non-magnetic stainless steel do not. A starter cookware allowance of $75 to $450 covers basic pieces — many homes already have enough cast-iron cookware to skip this entirely.

Induction stove cost by state